sample request

TRISTHOX ® D - PE:

TRISTHOX ® D - Series are anionic surfactants which are produced by phosphation of fatty alcohols and ethoxylated aliphatic and aromatic alcohols. Compared to other anionic surfactants, phosphate esters offer specific advantages, including stability over a broad pH range, good solubility and corrosion inhibiting properties. TRISTHOX ® D - Series are highly suitable for use as dispersing agents for a wide range of agrochemical formulations.

applications:

TRISTHOX ® D - Series can be used as an anionic emulsifier or dispersant in a variety of agricultural applications, including suspension concentrates and other liquid formulation types.

Physical Properties

Property, Unit

Value

Chemical Name

Tristrylphenol ethoxylate phosphate ester, acid

Alternate Name

Polyarylphenol ethoxylate phosphate ester, acid

Dtd.

6/16/2015

CAS Number

[119432-41-6 / 104376-75-2 / 70559-25-0]

SBU

Agriculture

Ionicity

Anionic

Function

Dispersant

Typical Usage (%)

2-3%

Pack Size (Kgs,net weight)

200.00

Container Type (Material)

HPDE drum

Shelf Life (Days)

365

DOT Classification

Non-regulated

Rev. #

R4

EPA 40 CFR Listing (Status)

Yes

Surface Tension - IKA Tensiometer - TECH-3-0013 (1.0%, mN/m)

44.00

Appearance - Visual (TECH-3-0001)

Liquid

Density meter/RD bottle - TECH-3-0005 - (g/ml, 25°C)

1.14

Flash point, Experimental - PMCC, °C

>100.00

Moles (Calculated - Average)

16.00

pH Glass electrode - 5% Conc. (TECH-3-0004)

4.50

Pour point, Test jar - ASTM D97 - °C

4.00

Surface Tension - IKA Tensiometer - TECH-3-0013 (0.1%, mN/m)

46.00

Water solubility - Experimental - Calculated (g/l, text)

Soluble

Typical Specifications

(Data is representative of average lots; data taken from
specific lots may vary.)

Actives - HPLC/GC/GC-MS/NVC (%)

97.00%

Need a sample?

We want to hear from you!

Surfactants which have been stored at low temperatures may thicken or solidify. They can be fluidized by warming with a drum heater or in a steam room. Drums should be vented prior to heating to avoid excessive pressure build up. Product temperatures over 54°C are not recommended.
Normal safety precautions (i.e. gloves and safety goggles) should be employed when handling these surfactants. Contact with the eyes and prolonged contact with the skin should be avoided. Wash thoroughly after handling materials.
A Material Safety Data Sheet is available upon request.

summary

Nothing contained herein grants or extends a license, express or implied, in connection with patents, issued or pending, of the manufacturer or others. The information in this publication is believed to be accurate and is given in good faith but no representation or warranty as to its completeness or accuracy is made. Suggestions for uses or applications are only based on experimental designs and formulations. Users are responsible for determining the suitability of these products for their own particular purpose. No representation or warranty, express or implied, is made with respect to information or products including without limitation to warranties of merchantability or fitness for a particular purpose or non-infringement of any third party patent or other intellectual property rights including without limit copyright, trademark and designs.The manufacturer shall not be liable (regardless of fault) to the vendee's employees, or anyone for any direct, special or consequential damages arising out of or in connection with the accuracy, completeness, adequacy or furnishing of such information.

have a question ?

Looking to learn more about how we can help you

let's talk