OPTIMUS ® NX-1100B:

OPTIMUS ® NX-1100B is a 100% actives non-ionic wetting agent based on polyoxyethylene ethers, APEO free, with a wetting time of 10 seconds at 1g/l concentration (testing method: EN 1772:2000). It is compatible with all commercially available active ingredients.

applications:

OPTIMUS ® NX-1100B, can be used in conjunction with all other surfactants, including but not limited to OPTIMUS ® NX-1188B, OPTIMUS ® NX-3388B, OPTIMUS ® NX-3388F, OPTIMUS ® AN-500L and OPTIMUS ® AN-500L/Q2. Inclusion of OPTIMUS ® NX-1100B is not limited to Suspension Concentrate (SC) formulations because it is aqueous free and can be incorporated as a strong wetting agent in formulations such as Oil Dispersion (OD), Emulsion-in-Water (EW) and Suspoemulsion (SE)

Physical Properties

Property, Unit

Value

Chemical Name

Polyoxyethylene ether

Alternate Name

-

Dtd.

2/9/2015

CAS Number

[PROPRIETARY]

SBU

Agriculture

Ionicity

Nonionic

Function

Wetter

Typical Usage (%)

0.5-1.5%

Pack Size (Kgs,net weight)

200.00

Container Type (Material)

HPDE drum

Shelf Life (Days)

365

DOT Classification

Non-hazardous

Rev. #

R7

Biodegradability (BOD,28 Days. %)

Yes

EPA 40 CFR Listing (Status)

Yes

Surface Tension - IKA Tensiometer - TECH-3-0013 (1.0%, mN/m)

26.50

Appearance - Visual (TECH-3-0001)

Liquid

Cloud point, Solution - TECH-3-0006 - °C

71.00

Density meter/RD bottle - TECH-3-0005 - (g/ml, 25°C)

0.99

Flash point, Experimental - PMCC, °C

>180.00

HLB (Calculated)

12.00

pH Glass electrode - 10% Conc. (TECH-3-0004)

7.00

Pour point, Test jar - ASTM D97 - °C

12.00

Surface Tension - IKA Tensiometer - TECH-3-0013 (0.1%, mN/m)

27.50

Water solubility - Experimental - Calculated (g/l, text)

Soluble

Typical Specifications

(Data is representative of average lots; data taken from
specific lots may vary.)

Actives - HPLC/GC/GC-MS/NVC (%)

99.50%

Hydroxyl # - Titration (mg KOH/g)

100.00

Surfactants which have been stored at low temperatures may thicken or solidify. They can be fluidized by warming with a drum heater or in a steam room. Drums should be vented prior to heating to avoid excessive pressure build up. Product temperatures over 54°C are not recommended.
Normal safety precautions (i.e. gloves and safety goggles) should be employed when handling these surfactants. Contact with the eyes and prolonged contact with the skin should be avoided. Wash thoroughly after handling materials.
A Material Safety Data Sheet is available upon request.

summary

Nothing contained herein grants or extends a license, express or implied, in connection with patents, issued or pending, of the manufacturer or others. The information in this publication is believed to be accurate and is given in good faith but no representation or warranty as to its completeness or accuracy is made. Suggestions for uses or applications are only based on experimental designs and formulations. Users are responsible for determining the suitability of these products for their own particular purpose. No representation or warranty, express or implied, is made with respect to information or products including without limitation to warranties of merchantability or fitness for a particular purpose or non-infringement of any third party patent or other intellectual property rights including without limit copyright, trademark and designs.The manufacturer shall not be liable (regardless of fault) to the vendee's employees, or anyone for any direct, special or consequential damages arising out of or in connection with the accuracy, completeness, adequacy or furnishing of such information.

have a question ?

Looking to learn more about how we can help you

let's talk